# TP1-W-A Touch Probe

> Touch probe with axial cable

- **Product ID (SKU):** tp1-w-a
- **Manufacturer:** DynamiTech s.r.o., Prague, Czech Republic (EU)
- **Price:** $840
- **Availability:** Normally in stock, shipped from the Czech Republic (EU)
- **Product page:** https://dynamitech.cz/product/tp1-w-a
- **Documentation:** https://docs.dynamitech.cz/tp1-family/
- **User manual (PDF):** https://dynamitech.cz/manuals/tp1-w-user-manual.pdf

## Description

The TP1-W-A touch probe is used for precise workpiece setup and tool measurement on CNC machine tools or as a precision limit switch in automation. On this model the cable exits axially. The probe can be fitted with any touch stylus with M4 thread.

| Currency | Price |
| --- | --- |
| USD ($) | $840 |
| EUR (€) | €740 |
| CZK (Kč) | 17 900 Kč |

## Technical Specifications

### Product classification

| Parameter | Value |
| --- | --- |
| Product family | TP1 |
| Product type | Touch Probe |
| Connection | Wired |
| Cable | Axial |
| Cable protection | Standard |

### Touch probe TP1-W-A

| Parameter | Value |
| --- | --- |
| Measuring principle | Kinematic 3-point seating |
| Measuring direction | ±X, ±Y, -Z |
| Measuring force XY / Z (stylus L30 mm) | 2 N / 6 N |
| Maximum deflection XY / Z | ±10° / 4.5 mm |
| Repeatability (stylus L30 mm) | < 0.002 mm |
| Maximum measuring speed | 2 m/min |
| Weight | 260 g |
| Protection rating | IP65 |
| Supply voltage VCC | 5 – 24 VDC |
| Power consumption | < 100 mA |
| Maximum output current | 200 mA |
| Cable length | 8 m |
| Connection cable | 4 x 0.25 mm² |
| Storage temperature | -20 to +70 °C |
| Operating temperature | +10 to +40 °C |
| Output signals | Touch NO/NC |
| Output signal type | PNP |
| Reaction time when touch input changes | 50 µs |

## Package Contents

- 1× TP1-W-A touch probe — Kinematic 3-point seating, < 0.002 mm repeatability, IP65
- 1× Connection cable, 8 m, axial exit — 4 × 0.25 mm², Touch NO/NC output (PNP), 5 – 24 VDC supply
- 1× Adjustment tool set — For centering the stylus and adjusting the probe

An M4 stylus, the CS16 clamping shank and the BP58 base plate are ordered separately.

## Wiring

### Wire marking

| Signal | Conductor colour |
| --- | --- |
| GND | white |
| VCC | brown |
| TOUCH_NO | yellow |
| TOUCH_NC | green |

### Output signal

Signal type: PNP

Chosen by the conductor you connect: TOUCH_NO or TOUCH_NC. Make the connection, or change it, with the power off.

| State | Conductor |
| --- | --- |
| NO | TOUCH_NO (yellow) |
| NC | TOUCH_NC (green) |

### Output signal timing

The TOUCH_NO and TOUCH_NC outputs against the deflection of the stylus. Both react to a change of the stylus within 50 µs.

| Signal | 0 – 0.5 ms | 0 – 0.3 ms |
| --- | --- | --- |
| touch NC | ↓ 0.25 | ↑ 0.15 |
| touch NO | ↑ 0.25 | ↓ 0.15 |
| stylus | ↑ 0.2 | ↓ 0.1 |

Edges — ↑ rising, ↓ falling — in ms from the start of each stretch of the time axis; the axis restarts at 0 after each break.

## Images

- [TP1-W-A Touch Probe – Touch probe with axial cable](https://dynamitech.cz/sources/tp1-w-a-touch-probe.webp)
- [TP1-W-A Touch Probe – dimension drawing](https://dynamitech.cz/sources/tp1-w-a-dimension.webp)

## Ordering

Order online at https://dynamitech.cz/cart or by email at info@dynamitech.cz. Prices are shown in US dollars; you can switch to EUR or CZK in the header or in the cart. VAT is added where applicable. Payment is by credit or debit card, or by bank transfer. We ship within the Czech Republic, across the EU, and internationally.